| |
|
YEAR
|
MANUFACTURER
|
MODEL
|
HOURS
|
SERIAL #
|
PRICE (USD)
|
|
2022
|
BROOKS BROTHERS TRAILERS
|
1RT1028KE
|
0.0
|
7K7CS1023NM000683
|
CALL FOR PRICE
|
|
|
2022 BROOKS BROTHERS 1RT 102-8KE /38" DUAL BULL
WHEEL TENSIONER TRAILER
VIN#7K7CS1023NM000683
CAPACITY: 18,400# GVWR-CALCULATED AT 15% WEIGHT
TRANSFER TO TOW VEHICLES. 12,800# APPROX.
LOAD CAPACITY.
AXLES: 8000# TANDEM DEXTER TORFLEX AXLEX
12-1/4" X 3-3/8" ELECTRIC BRAKES ON ALL WHEELS
(4) FOUR - 215/75R/17.5 LR-H TIRES, SINGLE WHEEL
APPLICATION. (4) FOUR - 17.5" X 6.75" SINGLE WHEEL
(8)HOLES ON 6 1/2" BOLT CIRCLE).(1) PAIR MUD FLAPS
(1) SET OF RUBBER WHEEL CHOCKS WITH HOLDERS
REEL RACKS:
(1) ONE - 84" DIA X 60" WIDE 8,000 LBS
(1) ONE - 2 7/8" REEL BARS WITH CROSSARM AND (1)
ONE LOCKING COLLAR. TENSIONING RAKE ASSEMBLY:
16" X 3/4" C-46400 ANNEALED NAVAL BRASS BRAKE
DISC. HUB, SHAFT AND DISC.
MACHINED AS ONE UNIT
M100 SERIES HAYES BRAKE CALIPER, 10,000 LBS. OF
CLAMPING FORCE. EASY REPLAEMENT NON ASBESTOS BRAKE
PADS AVAILABLE 4,100 FT. LBS. TORQUE HEAVY DUTY
BEARINGS.
BULL WHEEL TENSIONER:
4,000 LB TENSION RATING. 0-4 MPH
38" DUAL BULL WHEELS (BOTTOM OF GROOVE).
20" BRAKES. HYDRAULIC ACTUATION. REPLACEABLE
ELASTOMER SEGMENTS. NUMBER OF GROOVES: 5
GROOVE DIAMETER: 1.5" OPERATING CONTROLS ARE
LOCATED OFF GROUND WITH OPERATOR SEAT AND SAFETY
SCREEN. *OVERHEAD CANOPY MOUNTED ABOVE OPERATORS
STATION. *MOUNTING TUBE EQUIPPED WHERE TAKE-UP
RETRIEVER CAN BE INSTALLED AT A LATER DATE.
*MOUNTING PROVISION INSTALLED TO ACCOMMODATE A
SELF-CONTAINED POWERPACK AT A LATER DATE.
TONGUE, HITCH & JACK
5" X 3" TUBULAR STEEL A-FRAME.
6-POSITION ADJUSTABLE HITCH PLATE: (14" THROUGH
27"). 2-1/2" LUNETTE EYE SET AT 27" WHEN DELIVERED
3/8" X 36"L GALVANIZED SAFETY CHAINS WITH SAFETY
HOOKS AND ANCHOR SHACKLES. 12,000 LB DROP LEG
TONGUE JACK DUAL STABILIZER JACKS AT REAR CORNERS.
MAIN FRAME:
5" X 3" TUBULAR STEEL MAIN FRAMES
5" X 3" TUBULAR STEEL CROSSMEMBERS AT FRONT OF
CARGO BED. 6" X 3" TUBULAR STEEL CROSSMEMBERS AT
REAR OF CARGO BED.
CATWALK:
1/8" STEEL DIAMOND TREAD, MOUNTED ON 4" X 2"
TUBULAR PERIMETER FRAME. FULL LENGTH OF CARGO BED
FORE AND AFT OF FENDERS. FENDERS:
FABRICATED 1/8" STEEL DIAMOND TREAD PLATE FENDERS
INTEGRATED CONSTRUCTION WITH CATWALKS.
12 VOLT WIRING SYSTEM:
ICC & DOT APPROVED LED LIGHTS
SEALED BEAM RUBBER MOUNTED STOP, TURN, TAIL &
MARKER LIGHTS. S.O. CABLE WIRING LOOM, CLAMPED ON
16" CENTERS WITH RUBBER LINED CLAMPS. WIRING LOOM
TERMINATED IN JUNCTION BOXES CONNECFTIONS SOLDERED
& SEALED WITH HEAT SHRINK TUBING.
32" PIGTAIL W/7 WAY ELECTRICAL PLUG, TERMINATED
AT JUNCTION BOX.
*PERFORM DOT INSPECTION
*PURCHASE AND INSTALL RING POWER MUDFLAPS
INSTALL RING POWER DECALS
REGISTRATION HOLDER MOUNTED IN A-FRAME
FINISH: 3 STEP TRIPLE HOT DIPPED GALVANIZED
FINISH ALL ATTACHING PARTS ARE PAINTED BEFORE
ASSEMBLY AND INSTALLED WITH SERVICEABLE FASTENERS.
RUST PROHIBITIVE TWO-PART EPOXY POLYAMIDE PRIMER
TWO-PART ACRYLIC POLYURETHANE TOPCOATS.
|
|
|
UNITED STATES
|
(904) 293-7605
|
|
INTERNATIONAL
|
+1-904-737-7730
|
|
|
|
|
YEAR
|
MANUFACTURER
|
MODEL
|
HOURS
|
SERIAL #
|
PRICE (USD)
|
|
2021
|
BROOKS BROTHERS TRAILERS
|
1RT1028KE
|
2.0
|
7K7CS1022MM000527
|
$51250
|
|
|
2021 1RT 102-8KE/38" DUAL BULL WHEEL TENSIONER
VIN: 7K7CS1022MM000527
CAPACITY: 18,400# GVWR-CALCULATED AT 15% WEIGHT
TRANSFER TO TOW VEHICHLES. 12,800# APPROX. LOAD
CAPACITY. AXLES: 8000# TANDEM DEXTER TORFLES
AXLES. 12-1/4" X 3-3/8" ELECTRIC BRAKES ON ALL
WHEELS. (4) FOUR - 17.5" X 6.75" SINGLE WHEELS
(8 HOLES ON 6 1/2" BOLT CIRCLE. (1) PAIR MUD FLAPS
(1) SET OF RUBBER WHEEL CHOCKS WITH HOLDERS
REEL RACKS: (1) ONE - 84" DIA X 60" WIDE 8,000 LBS
(1) ONE - 2 7/8" REEL BARS WITH CROSSARM AND
(1) ONE LOCKING COLLAR
TENSIONING BRAKE ASSEMBLY: 16" X 3/4" C-46400
ANNEALED NAVAL BRASS BRAKE DISC. HUB, SHAFT AND
DISC. MACHINED AS ONE UNIT. M100 SERIES HAYES
BRAKE CALIPER, 10,000 LBS OF CLAMPING FORCE
EASY REPLACEMENT NON ASBESTOS BRAKE PADS AVAILABLE
4,100 FT. LBS. TORQUE. HEAVY DUTY BEARINGS
BULL WHEEL RENSIONER: 4,000 LB TENSION RATING
0-4 MPH. 38" DUAL BULL WHEELS (BOTTOM OF GROOVE)
20" BRAKES. HYDRAULIC ACTUATION.
NUMBER OF GROOVES: 5. GROOVE DIAMETER: 1.5"
OPERATING CONTROLS ARE LOCATED OFF GROUND WITH
OPERATOR SEAT AND SAFETY SCREEN
*OVERHEAD CANAOPY MOUNTED ABOVE OPERATOR'S STATION
*MOUNTING TUBE EQUIPPED WHERE TAKE-UP RETREIVER
CAN BE INSTALLED AT A LATER DATE.
*MOUNTING PROVISION INSTALLED TO ACCOMMODATE A
SELF-CONTAINED POWERPACK AT A LATER DATE
TONGUE, HITCH & JACK: 5" X 3" TUBULA STEEL A-FRAME
6-POSITION ADJUSTABLE HITCH PLATE (14" THROUGH 27"
2 - 1/2" LUNETTE EYE SET AT 27" WHEN DELIVERED
3/8" X 36"L GALVANIZED SAFETY CHAINS WITH SAFETY
HOOKS AND ANCHOR SHACKLES. 12,000LB DROP LEG
TONGUE JACK. DUAL STABILIZER JACKS AT REAR CORNERS
MAIN FRAME: 5" X 3" TUBULAR STEEL MAIN FRAME
5" X3" TUBULAR STEEL CROSSMEMBERS AT FRONG OF
CARGO BED. 6" X3" TUBULAR STEEL CROSSMEMBERS AT
REAR OF CARGO BED. CATWALK: 1/8" STEEL DIAMOND
TREAD,MOUNTED ON 4" X 2" TUBULAR PERIMETER FRAME
FULL LENGTH OF CARGO BED, FORE AND AFT OF FENDERS
FENDERS: FABRICATED 1/8" STEEL DIAMOND TREAD
PLATE FENDERS. INTEGRATED CONSTRUCTION WITH
CATWALKS. 12 VOLT WIRING SYSTEM: ICC & DOT APPROVE
LED LIGHTS SEALED BEAM RUBBER MOUNTED STOP, TURN,
TAIL & MARKER LIGHTS. S.O. CABLE WIRING LOOM
CLAMPED ON 16" CENTERS WITH RUBBER LINED CLAMPS
WIRING LOOM TERMINATED IN JUNCTION BOXES
CONNECTIONS SOLDERED & SEALED WITH HEAT SHRINK
TUBING. 32" PIGTAIL W/7 WAY ELECTRICAL PLUG
TERMINATED AT JUNCTION BOX.
*PERFORM DOT INSPECTION
*PURCHASE AND INSTALL RING POWER MUDFLAPS
*INSTALL RING POWER DECALS
*REGISTRATION HOLDER MOUNTED IN A-FRAME
FINISH: 3 STEP TRIPLE HOT DIPPED GALVANIZED FINISH
ALL ATTACHING PARTS ARE PAINTED BEFORE ASSEMBLY
AND INSTALLED WITH SERVICABLE FASTENERS
RUST PROHIBITIVE TW-PART EPOXY POLYAMIDE PRIMER
TWO-PART ACRYLIC POLYURETHANE TOPCOATS
DATE PLACED INTO SERVICE: 04/27/22
|
|
|
UNITED STATES
|
904-293-7605
|
|
INTERNATIONAL
|
+1-904-256-1783
|
|
|
|
|
YEAR
|
MANUFACTURER
|
MODEL
|
HOURS
|
SERIAL #
|
PRICE (USD)
|
|
2021
|
BROOKS BROTHERS TRAILERS
|
4DP25K75KE
|
111.0
|
7K7UP1426MM000143
|
$117875
|
|
|
2021 4DP 2.5K-7.5KE TURRET PULLER TRAILER
VIN: 7K7UP1426MM000143
UNIT PERFORMCANCE: RATED LINE PULL: 2,500 LBS.
FULL DRUM (WITH A 500# SAFETY FACTOR)
LINE SPEED: 3-4 MPH; DRUM: FOUR (4) IN S X S
CONFIGURATION CONTAINING 6,000' EACH OF YALE PE-12
DIAMETER PULLING ROGE. TANDEM LEVEL WINDS: HYDRA-
ULICALLY ACTUATED WITH VARIABLE SPEED CONTROL
*UPPER DRUM PLATFORM AND OPERATOR'S STATION
ROTATES ON A 360 DEGREEE HYDRAULIC POWERED SLEWING
RING. ALL HYDRAULIC LINES ARE PLUMED INTERNALLY
TRHOUGH A ROTARY UNION MOUNTED UNDERNEATH THE
TURRET BASE. NO LINE DISCONNECTS REQUIRED. HYDRAU-
LIC TURRET IS ACTUATED AT THE OPERATOR'S CONTROL
PANEL. POWER TRAIN/HYDRAULICS: YANMAR - 35. 1HP@
3000 RPM - TIER 4 FINAL DIESEL ENGINE
FUEL CAPACITY: 18 GAL; FULLY HYDROSTATIC DRIVE
PUMP EACH DRUM IS EQUIPPED WITH ITS OWN DIRECT
ULIC RELEASED SAFETY BRAKE EACH DRUM IS SELECTED
AND RELEASED VIA ROTARY STYLE SELECTOR SWITCH
LOCATED AT THE OPERATOR'S PANEL. FREE-WHEELING
DISCONNECTS ARE LOCATED ON EACH SIDE OF THE
MACHINE FOR THE ENGAGEMENT AND DISENGAGEMENT OF
THE DRIVE ASSEMBLIES.
OPERATOR/SAFETY FEATURES: SPRING APPLIED HYDRAULIC
PRESSURE RELEASED SAFETY BRAKE AT EACH DRUM. ALL
UNIT OPERATOR CONTROLS ARE LOCATED AT THE
OPERATOR'S STATION, OFF GROUND OPERATORS SEAT
SAFETY SCREEN; OVERHEAD CANOPY; 16" OVERSPIN
PAYOUT BRAKES, OPERATED FROM PANEL.
(4) GROUNDING LUGS; ONBOARD FIRE EXTINGUISHER
CAPACITY & DIMENSIONS: 17,600 LBS. GVWR - CALCULA-
TED AT 15%; WEIGHT TRANSFER TO TOW VEHICLE
OVERALL LENGTH APPROX 15'; A-FRAME 5'
OVERALL WITH 101.5"; WEIGHT APPROX. 14,000 LBS.
AXLES: 7,500 LBS. TANDEM TORFLEX AXLES
12-1/4" X 2-1/2 ELECTRIC BRAKES ON ALL WHEELS
(4) 235/85R 16 LR-E TIRES. (4) 16"X6" SINGLE
WHEELS (8 HOLE ON 6 1/2" BOLT CIRCLE); (1) PAIR
MUD FLAPS; WHEEL CHOCK HOLDERS, W/RUBBER WHEEL
CHOCKS. TONGUE, HITCH & JACK: 8"X3" TUBULAR STEEL
A-FRAME; 6-POSITION ADJUSTABLE HITCH PLATE (14"
THROUGH 27"); 2-1/2" LUNETTE EYE *MOUNTED ON 18"
HITCH EXTENSION. 1/2" X 36" L GALVANIZED SAFETY
CHAINS WITH KWS HOOKS. (4) D-RINGS, ONE LOCATED
AT EACH CORNER. *REGISTRATION HOLDER MOUNTED IN
A-FRAME. MAINFRAME: 5"X3" TUBULAR STEEL MAIN FRAME
5"X3" TUBULAR STEEL CROSSMEMBERS AT FRONT, REAR OF
BED. 3" C-CHANNEL CROSSMEMBERS ON 24" CENTERS.
JACKS: HEAVY DUTY HYDRAULIC JACK MOUNTED IN
A-FRAME. (4) TELESCOPING SABILZER JACKS-MANUAL
SLIDE OUT EXTENSIONS, HYDRAULIC LOWER AND RAISE
(1) PAIR WHEEL CHOCK HOLDERS WITH RUBBER WHEEL
CHOCKS. *ROLLER UP TARP FOR DRUM PROTECTION
*OPERATORS MANUAL CONTAINER
*18" GALVANIZED HITCH EXTENSION
*PERFORM DOT INSPECTION;
*INSTALL RING POWER DECALS
*INSTALL RING POWER MUDFLAPS
12 VOLT WIRING SYTEMS: ICC & DOT APPROVED LED
LIGHTS SELAED BEAM RUBBER MOUNTED STOP, TURN, TAIL
AND MARKER LIGHTS. S.0. CABLE WIRING LOOM, CLAMPED
ON 16" CENTERS WITH RUBBER LINED CLAMPS
WIRING LOOM TERMINATED IN JUNCTION BOXES
CONNECTIONS SOLDERED AND SEALED WITH HEAT SHRINK
TUBING. 32" PIGTAIL WITH 7-WAY RV TYPE PLUG
FINISH: 3 STEP TRIPLE HOT DIPPED GALVANIZED FINISH
ALL ATTACHING PARTS ARE PAINTED BEFORE ASSEMBLY
AND INSTALLED WITH SERVICEABLE FASTENERS.
RUST PROHIBITIVE TWO-PART EPOXY POLYAMIDE PRIMER
TWO-PART ACRYLIC POLYURETHANE TOPCOATS.
DATE PLACED IN SERVICE: 7/28/2021
|
|
|
UNITED STATES
|
904-293-7605
|
|
INTERNATIONAL
|
+1-904-737-7730
|
|
|
|
|
YEAR
|
MANUFACTURER
|
MODEL
|
HOURS
|
SERIAL #
|
PRICE (USD)
|
|
2020
|
BROOKS BROTHERS TRAILERS
|
4DP25K75KE
|
173.0
|
7K7UP1422LM000588
|
$102500
|
|
|
2020 BROOKS BOTHERS 4DP2.5K-7KE PLANETARY UNIT TRL
VIN: 7K7UP1422LM000588
RELATED LINE PULL: 2,500 LBS. FULL DRUM
LINE SPEED: 3-4MPH; DRUM: QUANTITY: 4, CONTAINING
6,000' EACH OF 1/2" DIAMETER SAMPSON TENEX PULLING
ROPE. LEVEL WIND: HYDRALULIC ACTUATED WITH
VARIALBE SPEED CONTROL. POWER TRAIN/HYDRAULICS:
38.9 H.P. @ 3000 RPMS ISUZU TIER 4 INTERIM
DIESEL ENGINE. FUEL CAPACITY: 18 GAL.
FULLY HYDROSTATIC DRIVE PUMP - CAPABLE OF 34 GPM
EACH DRUM IS DIRECTLY DRIVEN BY A PLANETARY GEAR-
BOX THAT IS INLINE WITH A HYDRAULIC MOTOR,
HYDRAULIC RELEASED SAFETY BRAKE, AND MECHANICAL
DISCONNECT (FOR ROPE PAYOUT) PULLING AND TENSIO-IN
NING FORCES ARE ALL HYDRAULIC, NO CHAIN AND
SPROCKET. OPERATOR /SAFETY FEATURES: SPRING
APPLIED HYDRAULIC PRESSURE RELEASED SAFETY BRAKE
ALL UNIT OPERATOR CONTROLS ARE LOCATED AT THE
OPERATOR'S STATION, OFF GROUND OPERATORS SEAT
SAFETY SCREEN; 16" OVERSPIN PAYOUT BRAKES,
OPERATED FROM PANEL (2) GROUDING LUGS MOUNTED
FRONT, EACH SIDE. CAPACITY & DIMENSIONS: 16,000
LBS. GVWR-CALCULATED AT 15% WEIGHT TRANSFER TO
TOW VEHICLE, OVERALL LENGTH 15'8" A-FRAME 5'
OVERALL WITH 101", WEIGHT APPROX. 6,000 LBS.
AXLES: 7,000 LBS. TANDEM TORFLEX AXLES
12" X 2" ELECTRIC BRAKES ON ALL WHEELS
(4) 235/85R16 TIRES; (4) 16" X 6" SINGLE WHEELS
(8 HOLE ON 6 1/2" BOLT CIRCLE);(1) PAIR MUDS FLAPS
TONGUE, HITCH & JACK: 5' X 3" TUBULAR STEEL
A-FRAME, 6- POSITION ADJUSTABLE HITCH PLATE
(14" THROUGH 27"). 2 1/2" LUNETTE EYE, 35,000 LBS
CAPACITY, 3/8" X 36" L GALVANIZED SAFETY CHAINS
WITH SAFETY HOOKS AND ANCHOR SHACKLES
TONGUE JACK - HYDRAULICALLY ACTUATED WITH DOUBLE
HOLDING VALVLES. MAINFRAME: 5" X3" TUBULAR STEEL
MAIN FRAME; 5" X 3" TUBULAR STEEL CROSSMEMBERS AT
FRONT, REAR OF BED. 3" C-CHANNEL CROSSMEMBERS ON
24" CENTERS. (2) REAR DROP LEG STABILIZIN JACKS-
HYDRAULICALLY ACTUATED WITH DOUBLE HOLDING VALVES
(1) PAIR WHEEL CHOCK HOLDERS WITH RUBBER WHEEL
CHOCKS. 12 VOLT WIRING SYSTEM: ICC & DOT APPROVED
SEALED BEAM RUBBER MOUNTED STOP, TURN TAIL AND
MARKER LIGHTS. S.O. CABLE WIRING LOOM, CLAMPED
ON 16" CENTERS WITH RUBBER LINED CLAMPS
WIRING LOOM TERMINATED IN JUNCTION BOXES
CONNECTIONS SOLDERED AND SEALED WITH HEAT SHRINK
TUBING 32" PIGTAIL WITH 6-WAY OR 7-WAY RV TYPE
PLUG. PAINT: TRAILER IS COMPLETELY STEEL GRIT
BLASTED SEAMS ARE SEALED WITH PAINTABLE CAULK
RUST PROHIBITIVE TWO-PART EPOXY POLYAMIDE PRIMER
TWO-PART ACRYLIC POLYURETHANE TOPCOATS-WHITE
ALL ATTACHMENTS PAINTED BEFORE ASSEMBLY AND
INSTALLED WITH SERVICEABLE FASTENER
|
|
|
UNITED STATES
|
904-293-7605
|
|
INTERNATIONAL
|
+1-904-737-7730
|
|
|
|
|
|
|
|
|
YEAR
|
MANUFACTURER
|
MODEL
|
HOURS
|
SERIAL #
|
PRICE (USD)
|
|
2021
|
BROOKS BROTHERS TRAILERS
|
PTB11115KE
|
0.0
|
7K7BS1116MM000547
|
CALL FOR PRICE
|
|
|
2021 BROOKS BROTHERS PTB111-15KE
PAYLOAD CAPACITY: 14,000#
GVWR: 17,500#, LENGTH ADJUSTMENTS: 24'/31'/38'
OVERALL WIDTH: 95", BOLSTER HEIGHT: 42"
15,000 LBS HEAVY DUTY DEXTER AXLE
OIL BATH HUBS, 8 STUDS
SLIPPER SPRINGS - ADJUSTABLE SPRING PADS FOR
WHEEL ALIGNMENT REINFORCED SPRING HANGERS WITH 3"
STRUCTURAL C-CHANNEL CROSSMEMBERS.
(4) FOUR - 215/75R17.5 LR-H TIRES. CAPACITY 3,100
LBS EACH. DUAL WHEEL APPLICATION.
(4) FOUR - 17.5"X6.75" WHEELS (8 HOLE ON 6 1/2"
BOLT CIRCLE). PAIR - MUD FLAPS
*WHEEL CHOCK HOLDERS W/RUBBER WHEEL CHOCKS
FRONT BOLSTER: 95" WIDE DOUBLE C-CHANNEL FRONT
BOLSTER WITH 21" STANCHIONS
CENTER BOLSTER: 95"W FIXED 5" DOUBLE C-CHANNEL
CONSTRUCTION WITH 21" STANCHIONS
CENTER BOLSTER: 95"W FIXED 5" DOUBLE C-CHANNEL
CONSTRUCTION WITH 21" STANCHIONS
REAR BOLSTER: 95"W FIXED 5 DOUBLE C-CHANNEL
CONSTRUCTION WITH 21" STANCHIONS
STANCHIONS: (4)FOUR - 21" LEVER LOCK, SLIDING &
REMOVABLE.
(4)FOUR - HEAVY DUTY RATCHET TYPE WINCH BINDERS
WITH BREAKER BAR. (4)FOUR - 15'L X 4"W X 12000 LBS
NYLON STRAPS, 8"X4"X1/4" WALL EXTENDABLE TONGUE
WITH EXTENSION ASSIST ROLLER AND REPLACEABLE
UHMW-PE WEAR PADS. 6 POSITION ADJUSTABLE HITCH
PLATE. 2 1/2" LUNETTE EYE, 35000 LBS. CAPACITY
3/8" X 36"L GALVANIZED SAFETY CHAINS WITH SAFETY
HOOK AND ANCHOR SHACKLE 7" STRUCTURAL C-CHANNEL
A-FRAME, 12,000# HEAVY DUTY DROP LEG JACK
7" X 4" TUBULAR STEEL FRAME. 10"X6" RECEIVER TUBE
7" X 4" TUBULAR STEEL CROSSMEMBERS UNDER REAR
BOLSTER.
3" STRUCTURAL C-CHANNEL CROSSMEMBERS FABRICATED
1/8" STEEL DIAMOND TREAD PLATE FENDER CONSTRUCTION
REINFORCED WITH 3" STRUCTURAL C-CHANNEL AT FRONT
AND REAR OF FENDER. 12 GAUGE STEEL FLOOR IN
BETWEEN THE CENTER AND REAR BOLSTERS.
*INSTALL RING POWER DECALS
*INSTALL RING POWER MUD FLAPS
PERFORM DOT INSPECTION
*REGISTRATION HOLDER MOUNTED IN A-FRAME
ICC & DOT APPROVED LED LIGHTS
SEALED BEAM RUBBER MOUNTED STOP, TURN, TAIL AND
MARKER LIGHTS
S.O. CABLE WIRING LOOM, CLAMPED ON 16" CENTERS
WITH RUBBER LINED CLAMPSWIRING LOOM TERMINATED IN
JUNCTION BOXES CONNECTIONS SOLDERED AND SEALED
WITH HEAT SHRINK TUBING. INTERNAL WIRING AND AIR
LINES IN TONGUE. PLUG RECEPTABLE LOCATED AT EACH
PINNEABLE LOCATION. ELIMINATES COIL CORD
6-WAY ALUMINUM DIE CAST PLUG (TRUCK SIDE) IN REAR
BUTT TUBE FOR LIGHT BAR HOOK-UPBREAKAWAY KIT WITH
SEALED LEAD ACID BATTERY & TRICKLE CHARGER
LIGHT BAR ASSEMBLY:
INCLUDES (2) OAL RUBBER MOUNTED SEALED BEAM LIGHTS
(STOP TURN AND TAIL); (3) CENTER ID MARKER LIGHTS
AND TWO SIDE MARKER LIGHTS. LIGHT BAR IS ATTACHED
TO THE POLE WITH AN ADJUSTABLE 1/4" CHAIN AND
WINGNUT.STANDARD ELECTRIC CABLE LENGTH IS 25' WITH
6-WAY ALUMINUM DIE CAST CONNECTOR (LONGER ELECTRIC
CABLES ARE PROVIDED FOR LONGER CAPACITY POLE
TRAILERS
FINISH UPGRADE:
3 STEP TRIPLE HOT DIPPED GALVANIZED FINISH
ALL ATTACHING PARTS ARE PAINTED BEFORE ASSEMBLY
AND INSTALLED WITH SERVICEABLE FASTENERS
RUST PROHIBITIVE TWO-PART EPOXY POLYMIDE PRIMER
TWO PART ACRYLIC POLYURETHANE TOPCOASTS
DATE PLACED INTO SERVICE: 01/25/24
|
|
|
UNITED STATES
|
(904) 293-7605
|
|
INTERNATIONAL
|
+1-904-737-7730
|
|
|
|
|
|
|
|
|
YEAR
|
MANUFACTURER
|
MODEL
|
HOURS
|
SERIAL #
|
PRICE (USD)
|
|
2020
|
BROOKS BROTHERS TRAILERS
|
UP10000
|
246.0
|
7K7UP1413LM000459
|
$91225
|
|
|
2020 UP 10000 UNDERGROUND PULLER BROOKS BROS TRLR
VIN: 7K7UP1413LM000459
GVWR: 9,400 LBS; CURB WEIGHT: APPROX. 8,500 LBS.
APPROX. 122" LONG; APPROX. 92" WIDE; APPROX. 108"
TALL (TO SAFETY SCREEN). RATED LINE PULL: 10,000
LBS. DEDICATED UNDERGROUND PULLER.
2,500 FT 7/16" PULLING CABLE
AUTO-LEVELWIND (LEAD SCREW DESIGN) SELF SUPPORTED
BOOM WITH HYDRAULIC 20" EXTENSION -TO-CENTER OVER
DUCT WORK HYDRAULICALLY ACTUATED: UP DOWN, LEFT,
RIGHT, EXTENDING OUT AND IN FAIRLEAD AT END OF
BOOM. NO STABILIZER JACK ON BOOM REQUIRED
POWER TRAIN/ HYDRAULICS (PULLER): YANMAR 4TNV88C
-47.6HP @ 3000 RPM-EPA TIER 4 FINAL-INDUSTRIAL
DIESEL POWER UNIT. FULLY HYDROSTATIC DRIVE PUMP
HYDRAULIC DRIVEN 10" TWIN CAPSTAN
BULLWHEELS-CONSTANT PULLING CAPACITY
OF 8,000 LBS. AVAILABLE
ELECTRONIC DYNAMOMETER: TO METER ACTUAL PULLING
TENSIONS, PULLING SPEED, & DISTANCE WITH USB PORT
TO TRANSFER PULLING DATA.
DIGITAL READ OUT FOR ALL FUNCTIONS
OPERATOR / SAFETY FEATURES: ALL UNIT OPERATOR
CONTROLS ARE LOCTED AT THE OPERATOR'S STATION, OFF
GROUND W/OPERATORS SEAT MOUNTED AT REAR CURBSIDE
OF MACHINE. INCLUDES OPERATOR SAFETY SCREEN.
(2) GROUDNING LUGS
*ALUMINUM A-FRAME MOUNTED TREADPLATE TOOL BOX.
*ON BOARD (LOCKABLE) STORAGE LOCATION FOR DUCT
ADAPTERS. *REGISTRATION HOLDER MOUNTED IN A-FRAME.
(2) 17.5"X6.75" SINGLE WHEELS (8 HOLE ON 6 1/2"
BOLT CIRCLE). (1) PAIR MUD FLAPS
TONGUE, HITCH & JACK: 5"X3" TUBULAR STEEL A-FRAME
6-POSITION ADJUSTABLE HITCH PLATE (14"THROUGH 27")
2-1/2" LUNETTE EYE; 3/8" X 36" GALVANIZED SAFETY
CHAINS WITH SAFETY HOOKS AND ANCHOR SHACKLES
HYDRAULIC FRONT AND REAR JACKS W/DUAL LOCKING
VALVES. MAIN FRAME: 7"X3" TUBULAR STEEL MAIN
FRAME; 7"X3" TUBULAR STEEL CROSSMEMBERS AT FRONT,
REAR OF BED. 12 VOLT WIRING SYSTEM: ICC & DOT
APPROVED LED LIGHTS. SEALED BEAM RUBBER MOUNTED
STOP, TURN, TAIL AND MARKER LIGHTS
S.O. CABLE WIRING LOOM, CLAMPED ON 16" CENTERS
WITH RUBBER LINED CLAMPS WIRING LOOM TERMINATED
IN JUNCTION BOXES. CONNECTIONS SOLDERED AND
SEALED WITH HEAT SHRINK TUBING. 32" PIGTAIL WITH
ELECTRICAL PLUG TERMINATED IN JUNCTION BOX
PAINT: TRAILER IS COMPLETELY STEEL GRIT BLASTED
SEAMS ARE SEALED WITH PAINTABLE CAULK RUST
PROHIBITIVE TWO-PART EPOXY POLYAMIDE PRIMER
TWO-PART ACRYLIC POLYURETHANE TOPCOATS
ALL ATTACHMENTS PAINTED BEFORE ASSEMBLY AND
INSTALLED WITH SERVICEABLE FASTENERS.
DATE PLACED IN SERVICE: 4/16/2021
|
|
|
UNITED STATES
|
904-293-7605
|
|
INTERNATIONAL
|
+1-904-737-7730
|
|
|
|
|
13 Results |
Results Per Page:
|
|
< Previous
Page 1 of 2
Next >
|
| Go To Page:
|
|